TurbiHud crashing / stops working

stringer01

Hi

I am having a strange problem with TurboHud. When running Greater Rifts the application will suddenly stop working (crashing).
The only way of continuing is to wait so that the process is terminated and to start the TurboHud again.
This can sometimes happen twice in one run.

Has anyone had a similar experience and knows how this can be resolved?

TurboHUD

Are you talking about TurboHUD.exe stopping working or TurboHUD_LightningMOD.exe stopping working?

stringer01

Sorry, should have been more specific. It is the TurboHUD_LightningMOD.exe that is stopping.
Example .. start GR and at some point the TurboHUD_LightningMOD.exe will just exit (stop working). Once the process has terminated I can press "start". A minute or so later it will crash again. It does not always crash several time during a run .. Some runs are w/out issues and other continue to crash TurboHUD_LightningMOD.exe.

TurboHUD

stringer01 发表于 2025-2-28 06:13
Sorry, should have been more specific. It is the TurboHUD_LightningMOD.exe that is stopping.
Example ...

If TurboHUD_LightningMOD.exe stops, then you must rerun instead of just clicking start. If you can only click start again, then TurboHUD.exe stops.
Perhaps you can find more application error logs in Windows Event Manager.

stringer01

Will do that and let you know how it goes

stringer01

Now I had time to test this further.

The problem manifests as follows:
1) Starting TurboHud_LightningMOD (Process TurboHud_LightningMOD.exe is running)
2) Pressing Start (Process Turbohud.exe is running)
3) In town everything is fine
4) Starting a Greater Rift
5) Overlay freezes for a second and then crashes
    (checked process in task manager and Turbohud.exe is gone)
6) I have to press start in TurboHud_LighningMOD interface again

This can happen several time in one Greater Rift run.
What could possibly cause this problem?

TurboHUD

stringer01 发表于 2025-4-1 17:16
Now I had time to test this further.

The problem manifests as follows:

Check if there are any error logs related to TurboHUD.exe in the Windows Event Manager

stringer01

Hi again - done. It seems it generates 3 events - 1 error and 2 Information
I have attached it to this reply.

Regards

TurboHUD

stringer01 发表于 2025-4-2 03:17
Hi again - done. It seems it generates 3 events - 1 error and 2 Information
I have attached it to th ...

Have you tried a clean installation

stringer01

I have. but do it again ^^ Reporting back when done